Luntec

Oil binder
luntec 40 and 20
Certified oil binder - entered in the list Federal Ministry for environment

1. Material -, preparation and company name trade name: luntec 40 or luntec 20

Manufacturer supplier:

L + N Recycling GmbH

An der Autobahn 7

D-89347 Bubesheim

Germany

Telephone: 08221/3206 30

Fax: 08221/3206 39

 

2. Composition / specification to constituents

Chemical characterisation: PU from the cooler recycling

 

3. Possible dangers

Strong whirling up avoid. Use eye protector with the extensive use

Further preventive measures are to be taken according to the materials which can be taken up

 

4. Only assistance Emergency

after inhalation : to expect not

after striking and eye contact: The eyes immediately at least 15 minutes with water rinse. Physician consult.

Swallow: to expect not

 

5. Measures for fire fighting

Fire risk: inflammable

Suitable fire extinguishing agents: Water, foam

Dangerous, if burning : Depends on the material which can be taken up.

Special protection equipment: Depends on the material which can be taken up.

 

6. Measures during unintentional release

Personal preventive measures: Carry eye protector with larger quantities.

Environmental protection measures: none

Cleaning methods: none

 

7. Handling and storage

Unused oil binder : drying stocks; for an unlimited period durable; use only to the yield in the case of loss

Used oil binder: Oil-soaked oil binders cause an enlargement of the evaporationable surface, in intensified measures hydrocarbon steams, which lead to a increased danger of explosion, develop and which flameability increase. Oil-soaked oil binders are to be kept away from any ignition sources. For the storage and feed checked and certified containers are to be used. These containers are to be protected against sun irradiations and other thermal effects.

 

8. Expositiosbegrenzung and personal protection equipment

Personal preventive measures : Depends on taken up substances.

9. Physical and chemical characteristics

Form: Granulates

Colour: grey-brown

Smell: neutrally

Change in status: not applicable

Melting point: not applicable

Weight: approx. 450 g/l

Oil binder requirement: 1l oil binder binds approx. 0.3 l oil

 

10. Stability and reactivity

Stably under normal conditions.

 

11. Specification to the toxicology

Toxic effect of the unused oil binder are not well-known. Toxic effect of the used oil binder depend on taken up the substances.

 

12. Specification to the ecology

Environmental pollutions are not to be expected while intended handling.

 

13. Notes to the disposal

Waste key (EU): 150201 (absorption and filter materials)

Oil binders, which are soaked with mineral oils or chemicals, are to be classified as particularly monitoring-needy wastes. The disposal depends essentially on the danger taken up of the substances.

The removal of oil wastes only takes place in combustion plant certified for it

If to be taken up the classification and disposal depends other chemicals or mineral oils with problematic additives on the danger of these materials.

 

14. Specification to the feed

Unused oil binder: no limitation

Used oil binder: Danger Class (Transport)  ADR class 4,1 digit 4c

 

15. Regulations

Indicationindication indication (symbols, R + S of records):

No Indicationindication indication necessarily.

Further national regulations: Danger property regulation road (ADR), rules for the prevention of accidents.

 

16. Other specification

All national / local regulations observe. The specification is not contractual warranties of product properties. They rely on the today's status of the knowledge.